Ana içeriğe atla

Polyacrylamide (PAM)

(C₃H₅NO)ₙ

Cationic polyacrylamide powder in 25kg bags. Enhances sludge dewatering efficiency, improves water clarity, and reduces chemical costs.

Ürüne Genel Bakış

Cationic polyacrylamide powder in 25kg bags. Enhances sludge dewatering efficiency, improves water clarity, and reduces chemical costs.

Chimiart Mühendislik Ekibi tarafından teknik olarak incelendi
Proses mühendisliği, KK ve mevzuat uyumu · Son inceleme 2026-06-12

Teknik Özellikler

Kimyasal Formül
(C₃H₅NO)ₙ
CAS Numarası
9003-05-8
Görünüm
Beyaz toz
Konsantrasyon
≥ 88% active content
Özgül Ağırlık
0.75-0.85 (bulk)
pH Aralığı
3.0-9.0 (effective range)
Çözünürlük
Yavaş çözünür
Mevcut Ambalajlar
25 kg torba
Raf Ömrü
24 ay
Depolama Koşulları
Kuru ve serin yer

Teknik Belgeler

Teknik Veri Formu (TDS)

Mevcut

Ayrıntılı teknik özellikler, ürün nitelikleri ve performans verileri.

İndir

Uygulamalar

Çamur susuzlaştırma
Su berraklığı
Maliyet azaltımı

Dozaj Kılavuzu

Prepare 0.1-0.5% stock solution. Typical dosing: 0.5-5 mg/L active polymer. Allow 30-60 min dissolution time.

Nasıl Çalışır

Cationic polyacrylamide adsorbs onto negatively charged particles, bridging them together into large, settleable flocs for efficient sludge dewatering.

Kullanım İpuçları

Available in 25 kg bags. Dissolve slowly with gentle agitation. Avoid over-dosing which can restabilize particles.

Sık Sorulan Sorular

What is the difference between cationic, anionic, and nonionic PAM?▼
Cationic PAM works best with negatively charged particles (most wastewater), anionic PAM suits positively charged particles, and nonionic PAM is used for specific applications. Our PAM is cationic, optimized for municipal and industrial sludge dewatering.
How long does prepared PAM solution remain effective?▼
Prepare PAM solutions fresh daily for best results. Diluted solutions begin degrading within 24-48 hours due to polymer chain breakage. Always prepare only the amount needed for immediate use.
What mixing speed should be used when preparing PAM solutions?▼
Use gentle mixing (50-150 RPM) to avoid shearing polymer chains. High-speed mixing permanently damages the polymer and reduces effectiveness. Allow 30-60 minutes dissolution time with slow agitation.
Can PAM be overdosed, and what happens if it is?▼
Yes, overdosing PAM can restabilize particles and worsen performance. Signs include poor floc formation, increased turbidity, and higher polymer consumption. Always start with low doses and gradually increase while monitoring performance.
What factors affect PAM performance in dewatering applications?▼
Key factors include sludge characteristics (organic content, particle size), mixing intensity, contact time, and equipment type. Conduct small-scale tests to optimize polymer type, dose, and application method for your specific sludge.

Sertifikalar ve Uyumluluk

ISO 9001

Bu Ailedeki İlgili Ürünler

Sık Sorulan Sorular

Cationic PAM works best with negatively charged particles (most wastewater), anionic PAM suits positively charged particles, and nonionic PAM is used for specific applications. Our PAM is cationic, optimized for municipal and industrial sludge dewatering.

İlgili içerik

Su arıtımında koagülasyon ve flokülasyonu anlamakKoagülant optimizasyonu için jar testi en iyi uygulamalarıUygulamanız için doğru koagülant nasıl seçilir

Özel bir çözüm mü gerekiyor?

Teklif isteyin, şartnamenizi görüşün veya tesis ziyareti planlayın. Teknik ekibimiz 24 saat içinde yanıt verir.

Teklif İsteEkibimizle Görüşün